Visit us at knx.org
Home » Vote » Fereshteh Palace

Fereshteh Palace

Info

Type of building Apartment Building
Number of KNX devices 4400
Summary Fereshteh palace is a luxury residential complex in 3 towers constructed in 16 floors including 114 apartments on 12 floors and 4 floors of parking, and is located in:” Tehran, Iran”.It was started in 2007.Our company started the electrical and BMS design of the project in 2010 and it will be finished in 2016.SMARTHOME:Fereshteh Palace Complex is a Smart Home in which the most modern integrated smart home systems has been presented,using Italian products of Gewiss Company.Some of the systems utilized in the apartments are as below: - Intelligent Lighting Control - Intelligent HVAC Systems Control - Smart Shutter and Blinder Control - Access Control - Energy Management - Entryphone system integrated to the KNX system All the functions mentioned above, can be controlled via SMS or Internet via Smartphone or Tablet with the Happy Home application.In design of the project, all the parameters for Green house were being considered,the project is constructed as it can get the "LEED" license
Main technical highlights -Energy efficiency : using of KNX sensors , Scenes ,KNX HVAC control, KNX energy meter devices , and Using solar energy to supply part of the electric lighting of buildings and the use of smart, etc. drastically reduces Energy Consumption . - KNX lighting control in the indoor and parking area. - Integration of Access control system, Surveillance system and the "LPR" (License plate recognition) system with the KNX system.
Benefits of KNX -KNX sensors installed in the building in order to make all the functions smart cause a huge energy saving. -Automation in the electrical room integrated with KNX. -Video Entryphone system Integration with KNX. -Timed control of the lighting in the parking according to traffic of the cars in. 4 floor of parking + 2 extension parking for the guests in 1500 meters integrated as one parking and controlled by KNX system. -KNX lighting control system -KNX shutter control system -useful scenes by use of KNX -KNX HVAC control system -Integration of conventional system with the smart home system
Which functions were realised with KNX Lighting control:dimming and switching ON/OFF by GEWISS actuator. Shutter control:by use of GEWISS shutter/blinder actuator. HVAC control:Controlled by Electrical valve and GEWISS thermostat and use of GEWISS switching actuator. Energy Management: management of energy consumption by the GEWISS energy meter devices. VIDEO ENTRYPHONE:by use of GEWISS MASTER ICE indoor touchpanel and GEWISS ANTAS outdoor panel, and GEWISS Porter desk in the lobby. Intercom function between the apartment units is also included. Integration of surveillance system with the KNX system:by use of GEWISS binary input.
Lighting All the indoor and parking lighting including switching ON/OFF and dimming functions are controlled by KNX system. for this reason there are: Scenes, sensors, push buttons and all these functions are executed via the GEWISS switching actuators and GEWISS dimming actuators. it is also possible to control the lighting from the GEWISS Master Ice touch panel and remotely via internet from the GEWISS HAPPY HOME application on the IOS and Android devices.
Shutter control All the shutters are controlled via GEWISS shutter/blinder actuator. it is possible to control the shutters via push button, scenes, timed commands from GEWISS timed thermostat or GEWISS MASTER ICE touch panel, or remotely via the internet with GEWISS HAPPY HOME application. in different times of the day , the shutters can be in different positions according to the daylight.
Heating, ventilation, air conditioning There are electrical valves and GEWISS switching actuators for making the heating/air cooling system ON or OFF and also GEWISS thermostats for controlling the heating , ventilation and air conditioning of the building. it is possible to control the heating/air cooling via push button, scenes,RF remote control, timed commands from GEWISS timed thermostat or GEWISS MASTER ICE touch panel, or remotely via the internet with GEWISS HAPPY HOME application.
Household Appliances we used a GEWISS KNX/IP interface which let the resident of the apartment unit to have access to his/her home over internet from everywhere. THE GEWISS HAPPY HOME application which can be installed on each IOS or Android device , has a graphical interface from where you can control all the KNX functions of your smart home by touching the related icons.all the KNX systems like : lighting system, Shutter, Hvac, etc. can be controlled via this application.
Technical Surveillance There are GEWISS motion detectors installed in the parking which will send an output to the GEWISS binary input in case of motion detected in the Surveillance system. And the GEWISS binary input will send the relative command to the switching actuator in order to activate the lighting.
Energy Management There are GEWISS energy meter devices to measure the energy consumpotion. it is possible to see the energy diagram on the GEWISS MASTER ICE touch panel that is installed in each apartment unist.it is possible to monitor and make decision for devices that consume energy from this touch control panel. the user can also make limitation or get a plan to the touch panel in case of exceeding the energy consumption.
Smart Metering There are GEWISS energy meter devices to measure the energy consumpotion. By use of GEWISS energy meter it is possible to measure and to visualize on display of the active energy values (exported and imported) and instantaneous active power values (exported and imported). If used with the KNX interface, it allows to communicate on the KNX bus system the measured values. it is possible to see the energy diagram on the GEWISS MASTER ICE touch panel that is installed in each apartment unist.it is possible to monitor and make decision for devices that consume energy from this touch control panel.
Audio / Video We have designed MOVIE scene in which : The light are dimmed, the HVAC system goes to comfort mode, the shutters close enough, the electricity from the GEWISS outlet socket make the Home theater system ON or OFF.
Visualization Each apartment unit has its own GEWISS MASTER ICE touch panel which is used for two reasons: 1-Vide Entryphone system 2-Visualisation an central control panel:In this case, all the data of the KNX system of apartment unit is imported to the GEWISS MASTER ICE touch panel. Images from each area can be imported too. Then it possible to monitor the house by touching the icons.For example you can execute a scene, turn the lights ON/OFF,increase/decrease the dimming lights,open/close the shutters,choose your desired fan-coil mode and change the set-point of each mode , control the CCTV,etc.
Remote Surveillance/Control Residents of each apartment unit can watch the area of their own parking zone from the LCD of MASTER ICE touch panel installed in the house, and also can make the lighting of its own parking area zone ON or OFF. this is possible because of integration of survuiliance system with KNX system and let the residents to have a remote control of their parking.

Pictures

« Return to projects